Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
  of the changes are in qla2xxx and ufs and all are mostly small and
  definitely don't impact the core"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
  Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
  scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
  scsi: qla2xxx: Check if FW supports MQ before enabling
  scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
  scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
  scsi: qla2xxx: Reduce noisy debug message
  scsi: qla2xxx: Fix login timeout
  scsi: qla2xxx: Indicate correct supported speeds for Mezz card
  scsi: qla2xxx: Flush I/O on zone disable
  scsi: qla2xxx: Flush all sessions on zone disable
  scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
  scsi: scsi_debug: Fix scp is NULL errors
  scsi: zfcp: Fix use-after-free in request timeout handlers
  scsi: ufs: No need to send Abort Task if the task in DB was cleared
  scsi: ufs: Clean up completed request without interrupt notification
  scsi: ufs: Improve interrupt handling for shared interrupts
  scsi: ufs: Fix interrupt error message for shared interrupts
  scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
  scsi: ufs-mediatek: Fix incorrect time to wait link status
  ...

Author: torvalds

drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c

@@ -193,7 +193,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 	}
 
 	/* alloc the udl from per cpu ddp pool */
-	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_KERNEL, &ddp->udp);
+	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_ATOMIC, &ddp->udp);
 	if (!ddp->udl) {
 		e_err(drv, "failed allocated ddp context\n");
 		goto out_noddp_unmap;

drivers/s390/scsi/zfcp_fsf.c

@@ -434,7 +434,7 @@ static void zfcp_fsf_req_complete(struct zfcp_fsf_req *req)
 		return;
 	}
 
-	del_timer(&req->timer);
+	del_timer_sync(&req->timer);
 	zfcp_fsf_protstatus_eval(req);
 	zfcp_fsf_fsfstatus_eval(req);
 	req->handler(req);
@@ -867,7 +867,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
 	req->qdio_req.qdio_outb_usage = atomic_read(&qdio->req_q_free);
 	req->issued = get_tod_clock();
 	if (zfcp_qdio_send(qdio, &req->qdio_req)) {
-		del_timer(&req->timer);
+		del_timer_sync(&req->timer);
 		/* lookup request again, list might have changed */
 		zfcp_reqlist_find_rm(adapter->req_list, req_id);
 		zfcp_erp_adapter_reopen(adapter, 0, "fsrs__1");

drivers/scsi/qla2xxx/qla_dbg.h

@@ -380,5 +380,8 @@ extern int qla24xx_soft_reset(struct qla_hw_data *);
 static inline int
 ql_mask_match(uint level)
 {
+	if (ql2xextended_error_logging == 1)
+		ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK;
+
 	return (level & ql2xextended_error_logging) == level;
 }

drivers/scsi/qla2xxx/qla_def.h

@@ -3880,6 +3880,7 @@ struct qla_hw_data {
 		uint32_t	scm_supported_f:1;
 				/* Enabled in Driver */
 		uint32_t	scm_enabled:1;
+		uint32_t	max_req_queue_warned:1;
 	} flags;
 
 	uint16_t max_exchg;

drivers/scsi/qla2xxx/qla_gs.c

@@ -1505,11 +1505,11 @@ qla2x00_prep_ct_fdmi_req(struct ct_sns_pkt *p, uint16_t cmd,
 static uint
 qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha)
 {
+	uint speeds = 0;
+
 	if (IS_CNA_CAPABLE(ha))
 		return FDMI_PORT_SPEED_10GB;
 	if (IS_QLA28XX(ha) || IS_QLA27XX(ha)) {
-		uint speeds = 0;
-
 		if (ha->max_supported_speed == 2) {
 			if (ha->min_supported_speed <= 6)
 				speeds |= FDMI_PORT_SPEED_64GB;
@@ -1536,9 +1536,16 @@ qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha)
 		}
 		return speeds;
 	}
-	if (IS_QLA2031(ha))
-		return FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB|
-			FDMI_PORT_SPEED_4GB;
+	if (IS_QLA2031(ha)) {
+		if ((ha->pdev->subsystem_vendor == 0x103C) &&
+		    (ha->pdev->subsystem_device == 0x8002)) {
+			speeds = FDMI_PORT_SPEED_16GB;
+		} else {
+			speeds = FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB|
+				FDMI_PORT_SPEED_4GB;
+		}
+		return speeds;
+	}
 	if (IS_QLA25XX(ha))
 		return FDMI_PORT_SPEED_8GB|FDMI_PORT_SPEED_4GB|
 			FDMI_PORT_SPEED_2GB|FDMI_PORT_SPEED_1GB;
@@ -3436,7 +3443,6 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 			list_for_each_entry(fcport, &vha->vp_fcports, list) {
 				if ((fcport->flags & FCF_FABRIC_DEVICE) != 0) {
 					fcport->scan_state = QLA_FCPORT_SCAN;
-					fcport->logout_on_delete = 0;
 				}
 			}
 			goto login_logout;
@@ -3532,10 +3538,22 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 		}
 
 		if (fcport->scan_state != QLA_FCPORT_FOUND) {
+			bool do_delete = false;
+
+			if (fcport->scan_needed &&
+			    fcport->disc_state == DSC_LOGIN_PEND) {
+				/* Cable got disconnected after we sent
+				 * a login. Do delete to prevent timeout.
+				 */
+				fcport->logout_on_delete = 1;
+				do_delete = true;
+			}
+
 			fcport->scan_needed = 0;
-			if ((qla_dual_mode_enabled(vha) ||
-				qla_ini_mode_enabled(vha)) &&
-			    atomic_read(&fcport->state) == FCS_ONLINE) {
+			if (((qla_dual_mode_enabled(vha) ||
+			      qla_ini_mode_enabled(vha)) &&
+			    atomic_read(&fcport->state) == FCS_ONLINE) ||
+				do_delete) {
 				if (fcport->loop_id != FC_NO_LOOP_ID) {
 					if (fcport->flags & FCF_FCP2_DEVICE)
 						fcport->logout_on_delete = 0;
@@ -3736,6 +3754,18 @@ static void qla2x00_async_gpnft_gnnft_sp_done(srb_t *sp, int res)
 		unsigned long flags;
 		const char *name = sp->name;
 
+		if (res == QLA_OS_TIMER_EXPIRED) {
+			/* switch is ignoring all commands.
+			 * This might be a zone disable behavior.
+			 * This means we hit 64s timeout.
+			 * 22s GPNFT + 44s Abort = 64s
+			 */
+			ql_dbg(ql_dbg_disc, vha, 0xffff,
+			       "%s: Switch Zone check please .\n",
+			       name);
+			qla2x00_mark_all_devices_lost(vha);
+		}
+
 		/*
 		 * We are in an Interrupt context, queue up this
 		 * sp for GNNFT_DONE work. This will allow all

drivers/scsi/qla2xxx/qla_isr.c

@@ -2024,8 +2024,8 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
 				res = DID_ERROR << 16;
 			}
 		}
-		ql_dbg(ql_dbg_user, vha, 0x503f,
-		    "ELS IOCB Done -%s error hdl=%x comp_status=0x%x error subcode 1=0x%x error subcode 2=0x%x total_byte=0x%x\n",
+		ql_dbg(ql_dbg_disc, vha, 0x503f,
+		    "ELS IOCB Done -%s hdl=%x comp_status=0x%x error subcode 1=0x%x error subcode 2=0x%x total_byte=0x%x\n",
 		    type, sp->handle, comp_status, fw_status[1], fw_status[2],
 		    le32_to_cpu(ese->total_byte_count));
 		goto els_ct_done;

drivers/scsi/qla2xxx/qla_mbx.c

@@ -334,14 +334,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			if (time_after(jiffies, wait_time))
 				break;
 
-			/*
-			 * Check if it's UNLOADING, cause we cannot poll in
-			 * this case, or else a NULL pointer dereference
-			 * is triggered.
-			 */
-			if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags)))
-				return QLA_FUNCTION_TIMEOUT;
-
 			/* Check for pending interrupts. */
 			qla2x00_poll(ha->rsp_q_map[0]);
 
@@ -5240,7 +5232,7 @@ qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data)
 	mcp->mb[8] = MSW(risc_addr);
 	mcp->out_mb = MBX_8|MBX_1|MBX_0;
 	mcp->in_mb = MBX_3|MBX_2|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (rval != QLA_SUCCESS) {
@@ -5428,7 +5420,7 @@ qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
 	mcp->mb[8] = MSW(risc_addr);
 	mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_1|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (rval != QLA_SUCCESS) {
@@ -5700,7 +5692,7 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
 	mcp->mb[9] = vha->vp_idx;
 	mcp->out_mb = MBX_9|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_4|MBX_3|MBX_1|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (mb != NULL) {
@@ -5787,7 +5779,7 @@ qla82xx_mbx_intr_enable(scsi_qla_host_t *vha)
 
 	mcp->out_mb = MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -5822,7 +5814,7 @@ qla82xx_mbx_intr_disable(scsi_qla_host_t *vha)
 
 	mcp->out_mb = MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -6014,7 +6006,7 @@ qla81xx_set_led_config(scsi_qla_host_t *vha, uint16_t *led_cfg)
 	if (IS_QLA8031(ha))
 		mcp->out_mb |= MBX_6|MBX_5|MBX_4|MBX_3;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -6050,7 +6042,7 @@ qla81xx_get_led_config(scsi_qla_host_t *vha, uint16_t *led_cfg)
 	mcp->in_mb = MBX_2|MBX_1|MBX_0;
 	if (IS_QLA8031(ha))
 		mcp->in_mb |= MBX_6|MBX_5|MBX_4|MBX_3;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);

drivers/scsi/qla2xxx/qla_nvme.c

@@ -536,6 +536,11 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport,
 	struct nvme_private *priv = fd->private;
 	struct qla_nvme_rport *qla_rport = rport->private;
 
+	if (!priv) {
+		/* nvme association has been torn down */
+		return rval;
+	}
+
 	fcport = qla_rport->fcport;
 
 	if (!qpair || !fcport || (qpair && !qpair->fw_started) ||
@@ -687,7 +692,15 @@ int qla_nvme_register_hba(struct scsi_qla_host *vha)
 	tmpl = &qla_nvme_fc_transport;
 
 	WARN_ON(vha->nvme_local_port);
-	WARN_ON(ha->max_req_queues < 3);
+
+	if (ha->max_req_queues < 3) {
+		if (!ha->flags.max_req_queue_warned)
+			ql_log(ql_log_info, vha, 0x2120,
+			       "%s: Disabling FC-NVME due to lack of free queue pairs (%d).\n",
+			       __func__, ha->max_req_queues);
+		ha->flags.max_req_queue_warned = 1;
+		return ret;
+	}
 
 	qla_nvme_fc_transport.max_hw_queues =
 	    min((uint8_t)(qla_nvme_fc_transport.max_hw_queues),

drivers/scsi/qla2xxx/qla_os.c

@@ -2017,6 +2017,11 @@ qla2x00_iospace_config(struct qla_hw_data *ha)
 	/* Determine queue resources */
 	ha->max_req_queues = ha->max_rsp_queues = 1;
 	ha->msix_count = QLA_BASE_VECTORS;
+
+	/* Check if FW supports MQ or not */
+	if (!(ha->fw_attributes & BIT_6))
+		goto mqiobase_exit;
+
 	if (!ql2xmqsupport || !ql2xnvmeenable ||
 	    (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
 		goto mqiobase_exit;
@@ -2829,10 +2834,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* This may fail but that's ok */
 	pci_enable_pcie_error_reporting(pdev);
 
-	/* Turn off T10-DIF when FC-NVMe is enabled */
-	if (ql2xnvmeenable)
-		ql2xenabledif = 0;
-
 	ha = kzalloc(sizeof(struct qla_hw_data), GFP_KERNEL);
 	if (!ha) {
 		ql_log_pci(ql_log_fatal, pdev, 0x0009,

drivers/scsi/qla2xxx/qla_target.c

@@ -1270,7 +1270,7 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess)
 
 	qla24xx_chk_fcp_state(sess);
 
-	ql_dbg(ql_dbg_tgt, sess->vha, 0xe001,
+	ql_dbg(ql_dbg_disc, sess->vha, 0xe001,
 	    "Scheduling sess %p for deletion %8phC\n",
 	    sess, sess->port_name);